Precautions For Installation Of High-pressure Blowers

1. Flat washers and spring washers must be used to tighten the screws;

2. Rubber buffer glue can be used to bear the weight of the high-pressure blower, especially high-power high-pressure blowers;

3. For some occasions with requirements for noise, a muffler can be installed to reduce the noise (generally, about 5dB). The muffler is installed at the end of the air inlet or outlet duct;

4. For some occasions with high requirements for noise, a layer of silencer can be added according to the conditions of the machine itself to meet the noise requirements on site. For details, please consult the manufacturer of the high-pressure blower or a professional noise control company;

5. When using silencer sponge to silence, pay attention to the distance between the high-pressure blower and the box, pay attention to the ventilation and heat dissipation of the high-pressure blower, and pay attention to the use of rubber buffer glue to bear the weight of the high-pressure blower. For details, you need to consult the manufacturer of the high-pressure blower, such as Gaorui high-pressure blower, etc.;

6. The inlet and outlet pipes of the high-pressure blower should be connected with a hose to isolate vibration.