What Are The Characteristics Of High-pressure Blowers?

1. High-pressure blowers have dual functions of blowing and suction, and can be used for suction or blowing. Some high-pressure blowers can also use suction and blowing at the same time, which is equivalent to the same function as a rotary vane vacuum pump.

2. It runs with little or no oil, and the output air is clean.

3. Compared with centrifugal blowers and medium-pressure blowers, the pressure of high-pressure blowers is much higher, often more than ten times that of centrifugal blowers, and the maximum pressure is as high as 230KPA.

4. If the pump body is integrally die-cast and uses a shock-proof mounting foot, then its requirements for the installation foundation are also very low, and it can even operate normally without a fixed foot, which is very convenient and saves installation costs and installation cycles.

5. Compared with other types of blowers, the noise of high-pressure blowers is lower, and the greater the power, the more obvious it is.

6. It can be used without maintenance. Its wear parts are only two bearings. Within the warranty period, basically no maintenance is required.

7. The mechanical wear of the high-pressure blower is very small, because there are no other mechanical contact parts except the bearings. Therefore, the service life is of course very long. As long as it is under normal conditions of use, there is no problem with 3 to 5 years.