Key Points For Disassembly And Assembly When Cleaning Centrifugal Fans

We all know that after a long period of use, centrifugal fans need to be cleaned. In the process of cleaning, we will inevitably encounter some places that are difficult to clean. In order to thoroughly clean the entire centrifugal fan, we need to disassemble the centrifugal fan. Since the internal structure of the centrifugal fan is relatively delicate, the process of disassembling the fan is also relatively complicated. Therefore, we must ensure that the disassembly process is safe and error-free. This is where we should pay special attention. At the same time, after the fan disassembly process is completed, we will clean the various parts of the centrifugal fan, and then we have to reassemble the centrifugal fan. What are the key points that deserve our attention when reassembling?

Disassembling the fan: First of all, the processing housing and the bearing box must be disassembled first. If these two parts are not disassembled first, the overall cleaning of the entire fan cannot be completed. Secondly, we need to pay special attention to the cleaning process that the motor direct drive to the fan part cannot be disassembled and cleaned to prevent mechanical failures such as motor burnout.

Assembling the fan: First, use a pair of inclined washers to level it and place it on the foundation. Secondly, whether cleaning or assembling the centrifugal fan, first test its adjustment mechanism to check its rotation flexibility.

It can be seen from this that we should start with those key points when disassembling and assembling the centrifugal fan. Only by paying attention to these key points can we ensure the accuracy of the actual disassembly work, and at the same time reduce the possibility of problems during assembly after the cleaning work is completed, ensuring that the user can finally use the fan normally and ensure that production work is not affected.