7.5KW IEC Approval Direct Drive Centrifugal Blower

 

Power: 4.0-22KW

Airflow: 1620-3000m³/h

Pressure range: 180mbar-300mbar

Motor: IE3/IE4

 

DPT series permanent magnet synchronous direct-drive high speed blower adopts belt-free design,compared with traditional high-speed centrifugal blowers,which saves more than 30% of electricity costs and no belt replacement requried.

 

 

Model	Power	Voltage	Frequency	Max airflow	Pressure	Current	inlet&out	Speed	Weight
	(KW)	(V)	(Hz)	(m³/h)	(mbar)	(A)	(mm)	rpm	KG
DPT-70	5.5kw (7.5HP)	380	0-560Hz	1620(m³/h)	200mbar	14.5	76mm(3'') &102mm(4'')	16800	33
DPT-85	7.5kw (10HP)	380	0-600Hz	1800(m³/h)	240mbar	16	76mm(3'') &102mm(4'')	18000	34
DPT-100	11kw (15hp)	380	0-600Hz	2400(m³/h)	260mbar	23	102mm(4') &135mm	18000	43
DPT-150	15kw (20hp)	380	0-600Hz	2500(m³/h)	260mbar	33.5	102mm(4') &135mm	18900	45
DPT-200	18.5kw (25hp)	380	0-650Hz	2650(m³/h)	280mbar	38.7	102mm(4') &135mm	19500	48
DPT-300	22kw (30hp)	380	0-700Hz	3000(m³/h)	300mbar	45	102mm(4') &135mm	21000	48

 

DPT-70 dimensions and installation drawing

 

DPT-70 Curve

 

(*each machine will be equipped with a synchronous high frequency converter (0-1000Hz) and a high-precision inlet filter 1000 mesh*)

 

 

1: DPT-70 high-speed turbo blower is a belt-free design, there is no need to consider replacing the belt after the machine has been used for a period of time. There is no maintenance cost and no impact on production.

2. Small footprint, 50% reduction in weight and volume compared to traditional high-speed turbo centrifugal blower..

3. The frequency range is 0-600Hz to meet different application scenarios

 

 

One of our customers learned that our company specializes in the production of high-speed centrifugal turbo blowers in China, and informed them of the current problems encountered in their seafood canned production line. First, the original high-speed turbo blower are purchased from Europe and with good quality. , But the procurement cost is too high. Second, the fixed location for the installation of the blower is limited, and the traditional blower cannot be put in. In response to these two issues, Third, They don't want change belt any more. Finally, After check all the parameters,.Thai customer purchased 4sets direct-connected high-speed turbo blower. After our customer received the blower, we carried out installation instructions. The customer's original blower needs 13A to meet the drying of the production line, and airhank blower only needs 7.5A. So In addition to solving the 3 problems encountered by customers and solving the energy consumption problem at the same time, we deeply feel the value of making a high-efficiency, energy-saving and maintenance-free blower.

 

 

--Export standard wooden box--

 

 

RBG single stage single phase/RBG double stage three phase/RBT single stage single phase /RBT double stage three phase

Hot Tags: 7.5kw iec approval direct drive centrifugal blower, China 7.5kw iec approval direct drive centrifugal blower manufacturers, suppliers, centrifugal fans, adjustable air knife, air blower for pneumatic conveying, high speed air blower, anti corrosion and anti leakage air knife, belt driven centrifugal blower for air and gas handing